Titan 2 Benzene Gas Monitor by Ion Science – Advanced portable monitor for detecting benzene gas in industrial and hazardous environments.

Titan 2 Benzene Gas Monitor

Monitor and sample benzene with world leading benzene detection technology. Titan 2 benzene gas monitor incorporates the NEW MiniPID T2 10.0 eV Sensor which offers improved sensitivity, reliability and overall performance. The unique sampling method eliminates interfering gases such as toluene, xylene and methane providing you with accurate benzene concentration readings you can rely on.Titan 2 delivers unrivalled accuracy and sensitivity in benzene detection and is ideal for use in a variety of sectors such as oil and gas, bulk storage facilities, chemical manufacturing and processing and asphalt production.Key Featurers : Titan 2 offers a world leading solution for the detection of benzene, providing precise detection at levels as low as 0.02 ppm (20 ppb) and as high as 20 ppm within 60 seconds. Titan 2 benzene gas monitor has been specifically engineered to analyse airborne dangers and can be utilised to evaluate the efficiency of purification or vapour recovery systems/units (VRU). Titan 2 benzene gas monitor has obtained certification for use in ATEX zoned environments and locations. Furthermore, the enclosure is IP65 rated, offering reliable protection against the intrusion of dust and water. New MiniPID T2 10.0 eV Sensor – Unique to Titan 2. Low Detection Limit – Can detect benzene down to 0.02 ppm (20 ppb). IP65 – Protection against a range of atmospheric conditions. Interchangeable Service Module – plug and play cartridge. 4-20 mA & RS485 Communication Options – Connect to your own control system.
Our Products Are…
  • Economically Priced
  • Futuristic Technology
  • Guaranteed Performance with Premium Quality
  • High Reliability
SpecificationValue
Sensor TypeMiniPID T2 10.0 eV Sensor
SensitivityBenzene specific within typical petrochemical matrix
Detectable Range0.02 ppm – 20 ppm
Measuring FrequencyOne Minute
Lower Level of Detection0.02 ppm (20 ppb) (10 ppb resolution)
Accuracy+/- 50 ppb or +/- 10%, whichever is greater*
Temperature StabilityInternally heated
Flow RateSample flow rate ≥ 100 ml/min
DisplayGraphic BW LCD 64 x 128 pixels with backlight
Bright LEDs for normal operation, fault and alarm
Two magnetic switches for menu operation
Operating TemperatureRecommended operating range of -20 oC to +50 oC (-4 oF to +122 oF) for optimum performance**
Approvals4FTZU 14 ATEX 0172X
Ex II 2G Ex db IIB+H2 T4 Gb
Tamb. = -20 oC to +55 oC
IECEx FTZU 14.0030X
Ex db IIB+H2 T4 Gb
Tamb. = -20 oC to +55 oC
QPS LR1621-1
Ex db IIB+H2 T4 Gb
AEx db IIB+H2 T4 Gb
Ta= -20 oC to +55 oC
Ingress Protection RatingIP65
Humidity0 – 99 % RH
Minimum Service Period6 months – PID lamp, electrode stack, inline filter, VRV restrictor, Hydrophobic & carbon filter replacement
12 months – PID lamp, electrode stack, inline filter, VRV restrictor, hydrophobic & carbon filter, Airsep filter
Cable EntryTwo ¾ NPT gland threads
Power RequirementsVin (nom) 24 V DC @ 3.2 A (recommended)
Vin (max) 32 V DC @ 2.4 A
Vin (min) 19 V DC @ 4.0 A
CommunicationIsolated 4-20 mA output
Isolated RS 485 Modbus connection via ASCII or RTU (simplex/half duplex or fully duplex)
Micro USB (PC Software)
Data StorageOn board MMC, minimum of six months (2GB)
Relay OutputTwo isolated outputs, voltage free, 24 v DC @ 1.25 A
Weight and Dimensions15 kg (33 lbs)
219 x 219 x 172 mm (8.6 x 8.6 x 6.8” approx.)
Gas Sample Line10 m max length, PTFE, 6 mm OD, 4 mm ID
Category: Tags: , ,

Related products